Do you know how to remove the stopper from the bathroom sink? This is a very common problem that people have. More often than not, the stopper of a bathroom sink gets stuck sometimes when you are carrying out your normal routine of taking out a bath or shower. Well, this problem is really quite simple to solve as all that you need to do is to pull out the stopper with ease and then fix the drain that is causing the blocked water from your bathtub.
To remove a stopper from a bathroom sink, first you will have to turn off the water from your bathtub and then unscrew the stopper from its stem. In fact, if you are wondering how to remove the stopper from the sink, you will have to take down the entire fixture including the basin and the faucet before you can start on the job. Once you have completed this task, you will notice that there is no stopper left in your bathroom sink. In fact, the sink basin might have been so full that there was no way for water to get out. However, you should ensure that the sink is completely empty before you remove the stopper.
Once the sink basin is free from water, you can easily remove the stopper from the bathroom sink. However, it is advisable that you use the socket wrench first so that the job will be easier. Once the stopper has been taken out, you should secure it with the help of pliers. You will find that the stopper threads are a bit different than the normal threads. Therefore, it is recommended that you use the pliers which are designed specifically for threads of this type.
Once the pliers have been obtained, you should turn the stopper clockwise so that you will be able to loosen the nuts that are holding the stopper in place. You should do this carefully because you do not want the stopper to come out if you are working on the drain pipe. The process of loosening the nuts is very simple. All you need to do is to turn the stopper counterclockwise. This process will make the stopper slip out of the pipe joint.
After the stopper has been loosened from the pipes, you should remove the stopper and the plumber’s tape. Now, you should fill the sink basin with warm water. This is done in order to dissolve the glue that is present on the stopper and the pipe joint.
Then, you should fill the sink with lukewarm water. This is done in order to soften the glue. You should also clean the pipe joint with the help of mild detergent. It is important to note that you should not allow the soap to come into contact with the sink basin.
After you have done all these things, you should remove the stopper from the pipe. You can do this by unscrewing the stopper from the pipe. However, it is important to ensure that you do not break the seal between the sink and the tub. In order to do this, you should apply some plumbers’ tape. You should then place the stopper back in the pipe joint.
When you want to know how to remove the stopper from the bathroom sink, you should do all of these processes at a time. It is important to ensure that you do them properly. After you have completed all of these processes successfully, you should ensure that you test the plumbing of your bathtub to ensure that it is working properly. If the tub is leaking, it may be due to the stopper not sealing properly. Therefore, you should replace the stopper.