How to Replace Bathroom Faucet

Are you wondering how to replace bathroom faucet with ease? In fact, there are several ways for you to accomplish this task without wasting too much of your time and effort. The following instructions will guide you in performing the replacement of your faucets in the most convenient way.

How to Replace Bathroom Faucet


The first step in how to replace bathroom faucet with ease is to ensure that the water supply line from the sink to the drain is properly shut. In most of the cases, these lines are located below the sink. However, if you cannot find them, you may simply turn off your plumbing main valve to eliminate the lost water supply line. Then, turn on the faucet again to get rid of all the remaining water pressure in the pipe. If your vessel sink has a floating feature, it is advisable to raise the drain plug so that it will no longer be clogged by trapped dirt or debris.


Second, remove the nuts from the old faucets and discard them. Your task is made easier if you have already identified the nuts you are going to remove. However, if you do not know what to look for, you may use a screwdriver, knife, or a pair of pliers to help you remove the nuts.


Third, locate the lift rod and detach it from its seat on the supply line. You have to do this because the lift rod is the one responsible for lifting up the drain. Then, locate the nuts that are attached on both sides of the lift rod and loosen them using your wrench. Pull out the supply lines and the faucets, and place them in a safe location where they will not cause any damage to your other equipment.


Fourth, use the new faucets and replace the old one on the wall. Before doing this, ensure that the pipes of the faucets are turned off and the pipes of the drain are securely fastened to avoid leakage. Then, connect the new faucets to their corresponding holes on the walls. Afterward, tighten all the bolts. Turn on the water supply to see if your newly purchased faucets are working properly.


Fifth, replace the washers and grooves on the threads of the old faucets. You can use a nut driver for this job. In order to help you determine which washer is the right one to be replaced, you may use a flat head screwdriver. Once you have identified the correct washer, remove it from its socket. Put the socket wrench over the washer and turn it counterclockwise. This will disengage the nut, allowing you to turn it and remove it with your wrench.


Sixth, locate the nut provided by the manufacturer for the new one and loosen it. Put on the wrench and turn it clockwise. Once the nut is loosened completely, pull it out. Place the new washer over the nut provided and install it onto the threaded portion of the bathtub drain.


Seventh, reconnect the supply pipe to its corresponding hole. Then, install the new one over the bathtub drain and tighten the nut again. Turn on the water supply again to check if your newly purchased bathroom faucets are working correctly. If they are, then you are ready to use your newly purchased faucets. To finish, fill the old tub with water and allow it to stand for some time before you use it.


The steps mentioned above are just the basics in learning how to replace bathroom faucet. There are more complicated tasks involved such as figuring out the proper valve for the new faucet and attaching it to the appropriate joint. There are also other considerations, like which type of joint to use so that the faucet will be watertight. If you feel the instructions do not cover the specifics, seek help from a professional.


Other tips include the use of a matching sink faucet handle to replace the old bathroom faucet with the new one. You also need to consider the type of faucet’s spout or valve. You need to replace it with something that is both functional and comfortable for you to use. You can choose from a sprayer faucet or an electric one.


In addition, the replacement of the supply lines for the bathroom faucet should be considered carefully. The supply lines for the bathroom faucet are responsible for carrying the hot water that results from the sink’s tap into the drainage system. If these supply lines become rusty, then this could cause a problem. When considering how to replace bathroom faucet supply lines, it is a good idea to have a professional come to the home and do the job. It may take a few hours for the repair to be completed, but it will be worth it because you and your family will no longer have to endure foul-smelling water.